Oval gear flow meter application advantages and field analysis

Advantages of elliptical gear flowmeter: It is a kind of flowmeter commonly used in industry and laboratories.

 It has high-precision measurement characteristics. It can measure the total amount of expensive media in 

industrial sectors such as petroleum, chemical, coating, medicine, food, and energy. Or flow.

In these process industries, the injection, extraction or mixing ratio control of chemical liquids, the 

quantitative injection of additives such as catalysts, hardeners, and polymerization inhibitors in chemical

 liquids, the addition of fragrances to food fluids and cosmetics, the quantitative supply of coating lines, 

etc. All need to use the flow meter.

sales01@cxflowmeter.com

The elliptical gear flowmeter is used for the measurement of storage, transportation, and distribution of

 petroleum products, etc. These application areas can be used as the basis of financial accounting or as a

 legal measurement for tax payment and execution of contracts by buyers and sellers.

The oval gear flow meter has the characteristics of simple structure, intuitiveness, low pressure loss,

 convenient maintenance, high measurement accuracy, and little influence by liquid viscosity. The 

elliptical gear flowmeter after the correct installation can ensure sufficient accuracy when used, and

 it is a relatively accurate flow meter. However, if the flow rate of the measured medium is too small 

when used, the influence of the leakage error of the meter will be prominent. Ensure sufficient 

measurement accuracy;

Secondly, when using an elliptical gear flowmeter, pay attention to the temperature of the measured 

medium not being too high, otherwise it will not only increase the measurement error, but also may 

cause the gear to jam; after long-term use, the internal gear of the elliptical gear flowmeter will also 

be affected. Corrosion and wear will affect the accuracy of the measurement. Therefore, you must 

always pay attention to observation, and regularly remove it for inspection. If conditions permit, 

it needs to be calibrated regularly, and the cycle is generally one year.

If you want to know more details and quotation, please contact winny: sales01@cxflowmeter.com